Of course, this will not be as successful as a new coil since there is only so much cleaning a coil can achieve. Also, it takes a while before the coil dries and you can use it again. Gunk in the coil causes a wicking problem.
A similar problem can be caused by other factors too, including restricted e-juice flow. Generally, VG is more viscous than PG.
On the other hand, some tanks have flow control. With this tech, the path between the wick and tank is closed or constricted, leading to insufficient juice flow. If your tank has flow control, open it. If your wattage is too high, or you are using a complex coil tiger coil or a Clapton coil, you might have heat problems. These accessories are to be managed carefully. Though they have thermodynamics to cool them down, you can also try reducing the wattage. But doing this will increase the delay between firing the battery and producing vapour.
If the vapour is too hot, instead of faulting the tank or the vape, you should check the wattage and airflow combination. High wattage gets the coil to be very hot, which in turn produces hot vapour.
When you open the airflow, cool air from outside mixes with the vapour to cool it. Adjust the airflow to let in more cool air to cool the vapour.
If you have a secondary mouthpiece with airflow slots, use it to cool the vapour as well. Most of the time, when your vape is hot, the battery will not be the problem. As such, the above solution will not work. In the rare events where the battery is the problem, you should take quick action. E-Cig Batteries are designed to operate in external temperatures up to 60 0 C. In most cases, the most common reasons vape pens get hot are due to one of four things - the battery, chain vaping, the coil, or the mouthpiece.
When it comes to a vape getting hot, the number one issue related to heat and vaping devices is the mouthpiece getting hot. In fact, it can get so hot, it can somewhat burn your lips. This is why many vape kits and retail shops offer some sort of rubber mouthpiece extension sleeve. While hot mouthpieces are common in any vaping device, it tends to be more prevalent with dry herb vape devices. Think of it this way. In a sense, dry herb vaporizers are hand-held convection ovens.
They have ceramic walls, they heat up to over degrees, and keep those temperatures for long periods of time. When you vape especially if you have long vape sessions , this heat will transfer up your device and to the mouthpiece, making it go from warm to hot.
How quickly this will happen ultimately depends on a variety of variables. These can include how close your heating chamber is to your mouthpiece, how long of a vape session you have, air temperature, and more. When your vaporizer gets hot, the majority of the time it will not be due to your battery and it is even rarer for it to be a serious issue with your battery. However, if you notice the heat is coming from outside of the device especially if you have a box mod , it most likely means the internal parts of your battery are getting hot.
While what is deemed too hot can be highly subjective, a good rule of thumb is if you take your batteries out and they are warm, it is normal. But if you take your batteries out and they are hot to the point you cannot keep holding onto them, then the battery is having an issue.
When you remove your battery, always make sure to place it on a non-flammable surface. If you hear hissing sounds or see any type of bulging to the casing of the battery, these are potential signs of your battery having serious overheating issues. Keep in mind, just because the batteries do not his or bulge, it does not mean you are in the clear.
You still need to be cautious, as you can use your battery close to its limit or even above its limit without it hitting this point. Soak it in warm water or grain alcohol before you start cleaning. While cleaning, be sure you take out all the gunky vape juice and let the coil dry out again. When the juice flow is restricted, it could be because of its thickness or the design of the tank. VG is thicker than PG so you might experience this challenge when you use a juice with high VG content.
Some devices come with tanks that allow you to control the liquid flow. With these, you can close down the path that joins the wick and the tank.
Setting it too low will also restrict the juice flow and will cause less wicking, causing your vape to get hot. The solution is as simple as opening up the control to allow liquid flow. If your problem is with the VG ratio, you could use a sub-ohm tank instead if you still want to use the high VG liquid.
However, the next time you notice that your vape is hotter than usual, check for the possibilities discussed above.
For the best hassle-free vaping experience you can use one of these great RDAs for squonking. These RDAs produce great clouds and flavour. Widely advertised as the healthier alternative to smoking, many vapers make the transition to vaping to boost their health and well-being.
Of course, vapers are …. Read more. Vaping is the process of inhaling vapor aerosol from an e-cigarette and there are different ways to do it. One of these ways is sub-ohm …. Despite only being in its formative years, vaping devices have done well to build a solid reputation as a safer, healthier solution to smoking.
While ….
0コメント